Introduction
The CML64 is a PCI Express x4 compliant Camera Link frame grabber that support one channel base/mediun/full configuration, multi-tap area, and line scan color and monochrome Camera Link cameras.
The CML64 series utilizes an FPGA design for greater image acquisition flexibility, higher performance, and improved pre-processing functionality.
The CML64 provides a 128 MB frame buffer to buffer and rearrange pixel data from the camera, before passing it to the PCI Express bus DMA, a feature ideal for industrial machine vision applications, such as high speed inspection and high resolution acquisition.
Scanning modes supported by the CML64 include using a linescan camera in the following modes:
a. Page trigger - triggered events trigger the acquisition of a given number of lines (an area acquisition system)
b. Line trigger - the system continuously acquires and transfers lines from the camera based on the line trigger signal (no lines are skipped)
c. Free-run - image acquisition is controlled by software, without any trigger input
Features
1. PCI Express x4 compliant
2. Supports one channel Camera Link in base/medium/full configuration
3. High-speed image transfer rates up to 680 MB/Sec
4. Acquisition pixel clock rates up to 85 MHz
5. 128 MB DDR SDRAM on-board memory
6. 2 TTL I/O, differential/TTL trigger input
7. Serial communication via Camera Link
Software Support
1. Available for Windows Visita(64/32-bit)/XP
2. Recommended programming environments: C#/.NET/VC++ 6.0/VB 6.0/BCB6.0
Or you can visit our website: http://www.nvp.com.tw/
沒有留言:
張貼留言